This article pertains to Computer Kit only.
If you are looking to take your Computer Kit apart to rebuild, follow these steps!
Step 1
Remove any cables and anything inserted into the USB ports from your kit.
Step 2
Place the Computer Kit flat on a level surface, with the ethernet and USB ports on the left-hand side.
Step 3
Gentle squeeze the right side of the casing and gently wiggle the case to release the Raspberry Pi and the top casing (which could be your speaker!)
If you're left-handed, simply spin the Computer Kit round, so the ethernet and USB ports are on the right side, and gently squeeze the left side of the case.